I was gifted some shelving my Grandfather had built for his house on Cape Cod many years ago. It once sat in the laundry room and held baby food jars full of nuts and bolts as well as small jars of oil and other knick-knacks. When the house was being closed up, I had asked for it since I knew it would make a wonderful paint storage rack and currently I was just using a few odd cardboard boxes. Well, over the years I have outgrown that little set of shelves and finally decided to construct some new ones, this time using MDF.

This project took about a half day, as it took a good bit of ripping and fitting to get everything right. The back and shelves themselves are 1/4″ MDF and the sides are 3/4″ MDF. I used a dado blade set to cut grooves in the sides for shelves and to recess the back panel. In retrospect, I could have recessed it a bit more and could have fit the shelves a bit tighter, but it all worked out just fine in the end. The back was glued and tacked on with nails. Shelves are glued in place. I hand painted it two coats of semi-gloss white, some paint I had leftover in the garage. The fact that the paint is a bit “tacky” means the paint jars don’t slide around on the shelves. The whole thing sits on a rail that’s screwed to the wall, with L-brackets up top screwed into the studs. I modeled it after the shelves my Grandfather built with shelves set to accommodate the various paint bottles I have collected. Overall, I think it’s just right for what I need and it turned out well.