I have been spending a really large amount of time lately trying to identify freight cars in old photos of the Georgetown Branch. As a modeler who is striving for authentic representation and operation, I am driven to figure out what traffic on the GB was like; where it came from and where it was going and who was shipping it. I don’t have a collection of train orders or waybills, only some records, maps and photos. Much of my study revolves around the industries that I am familiar with whether through first-hand account, B&O Form 6 data, old maps indicating what industries existed where and when, and photos which show the lay of the land and the freight cars on the rails.
Although seeing a freight car in a photo does not necessarily translate into knowing the details of shipments and carriers, it does provide some detail and context to help guide me as I make up my own model railroad roster and operational narrative. Seeing a Great Northern boxcar on a siding at a lumber yard, one can reasonably assume that it is carrying lumber from the Pacific Northwest. Seeing a tank car sitting on a fuel dealer siding, one can reasonably assume it is carrying fuel oil to be unloaded in a nearby storage tank. Seeing a B&O boxcar on the main line of the branch means very little; but it provides a reference point and a data point for my own model research and acquisition.
So with this new series I am going to take a closer look at the freight cars in the old photos I have and try to identify them as best I can. I am not trying to write a detailed article, but rather make a positive ID and gather some details, and perhaps some references. My end goal is to find HO scale models for these cars so I can represent them on my model railroad. I hope you enjoy.
Kicking it off, let’s start with a fun one.
Let’s start with the boxcar, furthest away, just in front of GP9 3400:
It’s a B&O boxcar (note the “13 Great States” herald on the far right). The car has 4/5 corrugated ends and Youngstown doors. Note the tack board placement on the end and door. From what I can tell this is an M-55 class variant, perhaps an M-55c, which I understand had those distinctive squared-off corrugated 4/5 ends. Ted Culotta has a nice blog post about the M-55a and the B&O RR Historical Society, B&O Modeler, has a nice article about the M-55h in the “orange comet” scheme. I found a few other photos which may give more insight: M-55? (Sentinel Service) 466054, M-55h 467673, M-55c 466350, . Accurail offers an M-55a model. as well as an M-55 trio of “Time Saver” schemes. Not sure of the details on this car. Sunshine Models also produced an M-55h kit, which you can see in the B&ORRHS article linked above. It sounds like National Scale Car has an M-55 kit in the works, which I eagerly await.
Next up is this DL&W hopper. Note, there is a vertical artifact on the photo which appears as two or three vertical stripes. This appears to be an 8-panel hopper. (10, if you count the two end panels where the slope is located.) I know little about DL&W so it makes the challenge even greater. I have spent a good amount of time digging around online and have yet to find some good reference material. A photo on the RR-Fallen Flags site appears to be a close match, but it’s got u-channel ribs at each end, where the car in the photo does not appear to. The paint scheme reveals a number xx6535, perhaps. Note the spacing of the LA | CKA | WAN | NA and the “The Road of Anthracite” herald. Bluford Shops produced an 8-panel, 2-bay hopper which to me VERY closely resembles the prototype in the photo I have. My search for an HO scale representation is ongoing; any help finding a source would be MUCH appreciated!
Last up is this gondola, spotted on the Eisinger Mill & Lumber siding:
This one is pretty neat. Thankfully, there is a fantastic resource for PRR freight cars: the PRR Freight Car Page. Studying the design of this car; the ribs, their length, the lettering and the shape of the car, I determined this is a PRR class G26 gondola. A personal guess at the number, 439586, matches with the prototype info being part of car nos. 439009-440709, AAR class GB, built in Altoona between 1930-31, measuring 65’6″ inside length, 20 panels. Thankfully, this car was produced in a kit form by the now-defunct Eastern Car Works a number of years ago, and I picked up a very nice completed model via eBay last month that will really go well on my layout (below). As I plan on modeling the construction of the Whitehurst Freeway, there will be plenty of girder loads to be brought down the Branch in this neat car!
I hope you’ve enjoyed this first installment of FCF. I have so many more freight car sleuthing stories to share and welcome any and all input you all may have on helping me solve some of these mysteries.
EDIT: I recently discovered the MyHeritage photo colorizer via Chris Adams’ wonderful Valley Local blog. This is an AI-based tool that does a darn decent job of colorizing black & white images. Now, it’s just for fun and nothing is meant to be perfectly accurate, but sometimes a bit of color helps the brain put things in context. Anyway, here’s what the subject image looks like when run through the colorizer:
